关闭
手动压接工具
Filters
  • 工具类型
    Select a value Reset filter
    • 8-indent crimping tool
      1
    • Assembly tool
      4
    • Crimp die
      1
    • Crimping tool
      3
    • Hand crimping tool
      44
    • Locator
      1
    • Service crimping tool
      1
    • Tool insert
      1
  • 工具介绍
    Select a value Reset filter
    • 4 indent crimp in acc. to MIL 22 520/2-01
      1
    • Angled
      2
    • BC
      1
    • BC / FC / har-bus® 64
      1
    • BC / har-bus® 64
      1
    • Crimp die included
      1
    • FC 1
      2
    • FC 2
      2
    • FC 3
      2
    • HARTING UIC 558: 0.75 ... 1 mm²
      1
    • Han D®, Han E®, DIN 41626, Ferrule, F-SMA, -ST
      1
    • Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224)
      2
    • Han D®: 0.14 ... 2.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6107/6207 and 09 15 000 6127/6227)
      2
    • Han E®: 0.14 ... 4 mm²
      2
    • Han E®: 0.5 ... 2.5 mm²
      1
    • Han E®: 0.5 ... 4 mm²
      1
    • Han-Yellock®: 0.14 ... 4 mm²
      2
    • Han-Yellock®: 0.5 ... 2.5 mm²
      1
    • Han-Yellock®: 0.5 ... 4 mm²
      1
    • Han® C: 1.5 ... 4 mm²
      3
    • Han® C: 4 ... 10 mm²
      1
    • Han® HsB: 1.5 ... 4 mm²
      1
    • SC, F-SMA F-ST
      2
    • Suitable for har-link®
      1
    • Top part
      1
    • acc. to DIN 41626
      2
    • acc. to DIN 46228
      2
    • for 250 bandoliered contacts
      3
    • for 500 bandoliered D-Sub high density contacts
      1
    • for 500 bandoliered contacts
      1
    • for 500 bandoliered standard contacts
      1
    • for D-Sub
      1
    • for FO connector (glass fibre)
      1
    • for FO connector (plastic fibre)
      1
    • for HARTING RJ Industrial® Gigalink Cat. 6A connectors
      1
    • for HARTING RJ Industrial® Gigalink connectors
      1
    • for HARTING RJ Industrial® PN Compact connector set
      1
    • for HARTING T1 Industrial contacts (AWG 24 ... AWG 22)
      2
    • for HARTING T1 Industrial contacts (AWG 28 ... AWG 26)
      2
    • for HARTING ix Industrial® to assamble the cable strain relief crimping
      1
    • for Han-Fast® Lock single contact
      4
    • for M17 contacts
      1
    • for M23 signal contacts
      1
    • for assembly of D-Sub hoods
      1
    • for coaxial contact
      2
    • for contacts FC 1, FC 2 and FC 3
      1
    • for crimp barrel and crimp flange
      1
    • for following 1 mm POF contacts
      1
    • for in-line cable jack variant
      1
    • for individual DIN 41612 contacts
      6
    • for inner contact die
      1
    • for ix Industrial® assembly tool
      1
    • for outer ferrule
      1
    • for power contacts
      2
    • for signal contacts
      1
    • for single stamped D-Sub contact
      1
    • for the shell cable entry
      1
    • for turned male and female contacts
      1
    • for type M
      1
    • for wire end ferrules
      4
    • incl. locator
      3
  • 应用领域
    Select a value Reset filter
    • Recommended for field use
      1
    • Recommended for production lines
      4
    • for individual, turned male and female contacts
      2
    • up to 1,000 crimping operations per year
      2
    • up to 10,000 crimping operations per year
      2
    • up to 3,000 crimping operations per year
      1
Show all filters
56 products (of 56)
1/2
新产品 - 递增
Han CRIMP TOOL WITH LOCATOR
Service crimping tool
Han CRIMP TOOL WITH LOCATOR
型号 09 99 000 0021
Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 2.5 mm², Han-Yellock®: 0.5 ... 2.5 mm²
Conductor cross-section: 0.14 ... 2.5 mm²
添加到心愿单
Han Hand Crimp Tool
Hand crimping tool
Han Hand Crimp Tool
型号 09 99 000 0110
Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 4 mm², Han-Yellock®: 0.5 ... 4 mm², Han® C: 1.5 ... 4 mm²
Conductor cross-section: 0.14 ... 4 mm²
添加到心愿单
Crimping Tool Han C 4/6/10 mm2
Hand crimping tool
Crimping Tool Han C 4/6/10 mm2
型号 09 99 000 0377
Han® C: 4 ... 10 mm²
Conductor cross-section: 4 ... 10 mm²
添加到心愿单
Double-Indent Crimping Tool
Crimping tool
Double-Indent Crimping Tool
型号 09 99 000 0888
Han D®: 0.14 ... 2.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6107/6207 and 09 15 000 6127/6227), Han E®: 0.14 ... 4 mm², Han-Yellock®: 0.14 ... 4 mm², Han® C: 1.5 ... 4 mm²
添加到心愿单
DSUB HAND CRIMP TOOL INN.COAX/SIGNAL C.
Hand crimping tool
DSUB HAND CRIMP TOOL INN.COAX/SIGNAL C.
型号 09 99 000 0501
for turned male and female contacts, 4 indent crimp in acc. to MIL 22 520/2-01
Conductor cross-section: 0.09 ... 0.82 mm²
添加到心愿单
SUB-D CRIMP TOOL SINGLE CONTACT
Hand crimping tool
SUB-D CRIMP TOOL SINGLE CONTACT
型号 09 99 000 0175
for single stamped D-Sub contact
Conductor cross-section: 0.09 ... 0.56 mm²
添加到心愿单
Crimptool Opening
Hand crimping tool
Crimptool Opening
型号 09 99 000 0647
for crimp barrel and crimp flange
添加到心愿单
D SUB HD SERVICE CRIMP TOOL
Hand crimping tool
D SUB HD SERVICE CRIMP TOOL
型号 09 99 000 0596
添加到心愿单
DSUB HAND CRIMP TOOL POWER CONTACT
Hand crimping tool
DSUB HAND CRIMP TOOL POWER CONTACT
型号 09 99 000 0509
for power contacts
Conductor cross-section: 0.5 ... 6 mm²
添加到心愿单
DSUB HAND TOOLS
Hand crimping tool
DSUB HAND TOOLS
型号 09 99 000 0169
for 500 bandoliered standard contacts
Conductor cross-section: 0.09 ... 0.56 mm²
添加到心愿单
Crimping tool Han-Fast Lock 4-10mm² angl
Hand crimping tool
Crimping tool Han-Fast Lock 4-10mm² angl
型号 09 99 000 0877
Angled, for Han-Fast® Lock single contact
Conductor cross-section: 4 ... 10 mm²
添加到心愿单
Ferrule Crimp tool 10mm2
Hand crimping tool
Ferrule Crimp tool 10mm2
型号 09 99 000 0374
for wire end ferrules
Conductor cross-section: 10 mm²
添加到心愿单
Crimping tool for 1mm POF
Crimping tool
Crimping tool for 1mm POF
型号 20 99 000 1035
for following 1 mm POF contacts, Han D®, Han E®, DIN 41626, Ferrule, F-SMA, -ST
添加到心愿单
DIN-Tool Crimptool Coax M
Hand crimping tool
DIN-Tool Crimptool Coax M
型号 09 99 000 0194
Crimp die included, for coaxial contact, acc. to DIN 41626
添加到心愿单
D SUB HD CR. TOOL F.500 PCS REEL- CS 20
Hand crimping tool
D SUB HD CR. TOOL F.500 PCS REEL- CS 20
型号 09 99 000 0597
for 500 bandoliered D-Sub high density contacts
添加到心愿单
CRIMPING TOOL FOR POF
Hand crimping tool
CRIMPING TOOL FOR POF
型号 20 99 000 1033
for FO connector (plastic fibre), SC, F-SMA F-ST
添加到心愿单
D-Sub DIE OUTER COAX CONTACT
Crimp die
D-Sub DIE OUTER COAX CONTACT
型号 09 99 000 0508
for D-Sub
添加到心愿单
Crimping tool Han-Fast Lock 4-10mm²
Hand crimping tool
Crimping tool Han-Fast Lock 4-10mm²
型号 09 99 000 0831
for Han-Fast® Lock single contact, incl. locator
Conductor cross-section: 4 ... 10 mm²
添加到心愿单
Crimping Tool Han HsB 1.5/2.5/4 mm²
Hand crimping tool
Crimping Tool Han HsB 1.5/2.5/4 mm²
型号 09 99 000 0986
Han® HsB: 1.5 ... 4 mm²
Conductor cross-section: 1.5 ... 4 mm²
添加到心愿单
Crimping tool for glass fibre
Hand crimping tool
Crimping tool for glass fibre
型号 20 99 000 1031
for FO connector (glass fibre), SC, F-SMA F-ST
添加到心愿单
DSUB HAND CRIMP TOOL OUTER COAX CONT.
Hand crimping tool
DSUB HAND CRIMP TOOL OUTER COAX CONT.
型号 09 99 000 0503
for coaxial contact, acc. to DIN 41626, for outer ferrule
添加到心愿单
Crimping Tool Han-Fast Lock 1.5/2.5mm²
Hand crimping tool
Crimping Tool Han-Fast Lock 1.5/2.5mm²
型号 09 99 000 0881
for Han-Fast® Lock single contact, incl. locator
Conductor cross-section: 1.5 ... 2.5 mm²
添加到心愿单
Hand crimping tool UIC 558
Hand crimping tool
Hand crimping tool UIC 558
型号 09 99 000 0967
HARTING UIC 558: 0.75 ... 1 mm²
Conductor cross-section: 0.75 ... 1 mm²
添加到心愿单
DSUB HAND CRIMP TOOL SIGNAL CON.W.P
Hand crimping tool
DSUB HAND CRIMP TOOL SIGNAL CON.W.P
型号 09 99 000 0505
for signal contacts
添加到心愿单
Ferrule crimp tool 16 / 25qmm
Hand crimping tool
Ferrule crimp tool 16 / 25qmm
型号 09 99 000 0830
for wire end ferrules
Conductor cross-section: 16 ... 25 mm²
添加到心愿单
Crimping tool Han-Fast Lock 1.5/2.5 mm²
Hand crimping tool
Crimping tool Han-Fast Lock 1.5/2.5 mm²
型号 09 99 000 0876
Angled, for Han-Fast® Lock single contact
Conductor cross-section: 1.5 ... 2.5 mm²
添加到心愿单
basic hand crimp tool BC/FC/har-bus64
Hand crimping tool
basic hand crimp tool BC/FC/har-bus64
型号 09 99 000 0620
for individual DIN 41612 contacts, BC / FC / har-bus® 64
添加到心愿单
CRIMPING TOOL
Hand crimping tool
CRIMPING TOOL
型号 09 99 000 0120
for 250 bandoliered contacts, FC 3
Conductor cross-section: 0.5 ... 1.5 mm²
添加到心愿单
GDS A-B/C CRIMPING TOOL ON REEL
Hand crimping tool
GDS A-B/C CRIMPING TOOL ON REEL
型号 09 99 000 0248
for 500 bandoliered contacts, BC / har-bus® 64
Conductor cross-section: 0.09 ... 0.5 mm²
添加到心愿单
DIN-Tool Crimpzange FC2
Hand crimping tool
DIN-Tool Crimpzange FC2
型号 09 99 000 0119
for 250 bandoliered contacts, FC 2
Conductor cross-section: 0.14 ... 0.56 mm²
添加到心愿单
1 2
比较
0
排序方式
Filters
0
联系浩亭: HARTING (Zhuhai) Sales Limited  Warehouse Building No. 19   519085 Chuangxinsilu, Zhuhai  中国
浩亭技术支援: 400-176-1166电子邮件地址  (有关产品，订单和用户账号的问题)
网站支持: 86-21-3418 9758电子邮件地址  (有关网页的技术问题)
© HARTING Technology Group
主页 联系 隐私政策 使用条款 销售和交付条件 Cookie 政策 Cookie设置 版权声明/使用条款 粤ICP备19078745号-1 粤公网安备 44049102496590